steel buildings

metalconstructionnews.com/blog

Monday, May 02, 2011
On Monday afternoon executives from the American Iron and Steel Institute provided an update on the state of the steel industry. After Thomas Gibson, president and CEO of AISI, welcomed everyone, Dan DiMicco, AISI chairman and CEO of Nucor Corp., began with the latest industry data.
DiMicco started off by saying that they are seeing positive signs that the economy continues on a slow but steady recovery, with steel shipments at approximately 22 million tons in the first quarter of 2011. With an expectation to see a strengthening of demand for the second quarter and the second half of the year, the estimate is for a shipment of 95 million tons in 2011, an increase of roughly 14 percent over the 83 million tons the industry shipped in 2010. DiMicco also mentioned that domestic capacity utilization rose to 75 percent in the first quarter, a five percent improvement from the first week of January, similar to the positive improvement that was experienced in the first quarter of 2010.
DiMicco reported that finished import market share is currently at 21 percent, the same level as in 2009 and 2010. Yet the most recent steel import monitoring and analysis data from the March recorded a sharp rise in finished imports, bringing it to the highest level since January 2009.
In terms of AISI’s policy priorities, safety remains a top priority for the industry, DiMicco said. AISI also supports a strong pro-manufacturing strategy that will assist U.S. manufacturers in competing in today’s global economy. With a primary focus and support to see the government avoid excess regulation that reduces industrial competitiveness, the need to keep trade laws strong and strictly enforced remains important. Additional policy priorities include addressing China’s currency manipulation and encouraging the development of energy efficiency and breakthrough technologies.
Mario Longhi, AISI director and president and CEO of Gerdau Ameristeel Corp., offered the AISI’s energy policy perspective saying that the steel industry offers both opportunities and challenges in regards to energy. Presently the energy sector is a strong source of steel demand, and it is expected to remain strong throughout the decade. All areas of energy–oil pipelines and offshore drilling, natural gas extraction and transport, clean fuel, nuclear power, wind, solar–require large amounts of steel. Representing 7 percent of steel demand and along with the continuing resurgence in the automotive sector, the energy sector is an important market, Longhi said.
Longi continued, saying that natural gas is a strategic domestic source that can help drive economic recovery. Government policy should support the further development of natural gas resources and the climate and energy policy must take into account international competitors and how the cost of compliance with government policy can alter the competitive balance in the marketplace. Longi went on to say that Congress must act to prevent the misguided plan of the EPA’s regulation of greenhouse gases from undermining efforts to promote economic growth and job creation.
While the U.S. steel industry has achieved a 30 percent reduction in energy intensity per time of steel produced since 1990, making it a global leader as compared to steel industries in other nations, the challenge is to continue to make further reductions through the use of completely new technologies, which the U.S. lags far behind. Longi said that government incentives to further energy efficiency goals should be part of an effective natural energy policy.
John Surma, AISI director and Chairman and CEO of the United States Steel Corp., said that to strengthen the economy and competitiveness, the manufacturing sector needs to grow. The government’s approach to trade policy is critical to AISI’s ability to support this goal. Priorities are to withstand rules-based trade, keeping strong the trade laws against unfair trade and injurious surges, strictly enforcing trade agreements and combating Chinese currency manipulation and other protectionist foreign government policies. Surma said that the AISI continues to urge Congress to pass legislation to address China’s currency undervaluation, by passing the Currency Reform for Fair Trade Act.
Regulo Salinas, AISI vice chairman and vice president of Ternium Mexico, reported that the NAFTA region is also experiencing a slow but steady recovery. In Mexico, economic growth is expected to be in the range of 4 to 5 percent this year. While the automotive market has been a solid source of steel demand, construction continues to lack throughout the NAFTA region. A NAFTA-wide infrastructure conference is scheduled to be held in Washington, D.C., on June 7.
Following the reports from the executives, a short question-and-answer session was held.

For more information on AAA steel buildings, area zoning building requirements, buildings for storage, or buildings from steel, please visit our metal building informational site.

For more information on buy steel buildings, commercial steel building, or do it yourself buildings, please visit our metal buildings informational site.

For more information on erecting a steel building, metal church, or facades for steel buildings, please visit our steel buildings informational site.

For more information on metal garage, planning the steel building purchase, or premier metal roof systems, please visit our steel buildings informational site.

For more information on purchase a steel building, shop for steel buildings, or roofing systems steel, please visit our quality steel buildings informational site.

For more information on steel barn, steel church, or steel hangars, please visit our steel building accessories informational site.

For more information on steel homes, steel building foundations, or steel building advice, please visit our standing seam premier roofing informational site.

For more information on steel building interiors, steel building technology, or the correct type steel building, please visit our steel habitats informational site.

For more information on tile roof systems, wood vs steel buildings, or types of steel buildings, please visit our steel buildings informational site.

metalconstructionnews.com

Posted 06/22/2011
Based on preliminary Census Bureau data, the AISI reported that the U.S. imported a total of 2,692,000 NT of steel in May, including 1,838,000 NT of finished steel. Up 6-and down 5-percent , respectively, from April’s final data.

The annualized total and finished steel imports in 2011 would be 28.0 and 21.1 million NT, respectively, up 17- and 12 -percent compared to 2010. The finished steel import market share in May was an estimated 21-percent and is also 21-percent year-to date.

For more information on AAA steel buildings, area zoning building requirements, buildings for storage, or buildings from steel, please visit our metal building informational site.

For more information on buy steel buildings, commercial steel building, or do it yourself buildings, please visit our metal buildings informational site.

For more information on erecting a steel building, metal church, or facades for steel buildings, please visit our steel buildings informational site.

For more information on metal garage, planning the steel building purchase, or premier metal roof systems, please visit our steel buildings informational site.

For more information on purchase a steel building, shop for steel buildings, or roofing systems steel, please visit our quality steel buildings informational site.

For more information on steel barn, steel church, or steel hangars, please visit our steel building accessories informational site.

For more information on steel homes, steel building foundations, or steel building advice, please visit our standing seam premier roofing informational site.

For more information on steel building interiors, steel building technology, or the correct type steel building, please visit our steel habitats informational site.

For more information on tile roof systems, wood vs steel buildings, or types of steel buildings, please visit our steel buildings informational site.

Oct 12, 2010

PITTSBURGH, Oct. 12 /PRNewswire/ — United States Steel Corporation (NYSE: X) is pleased to announce the addition of a new high-quality, value-added product to our lineup of construction steels that supports “green” building design and practices, positively impacting these projects’ environmental sustainability. ACRYLUME CF™ Coated Sheet, a new coated flat-rolled steel that has a chromium-free clear polymer coating, continues to provide all of the quality and performance attributes inherent in the new product’s predecessor, ACRYLUME® Coated Sheet.

U. S. Steel’s new ACRYLUME CF™ offers the environmentally conscious metal building construction industry the nation’s first chromium-free acrylic coating on GALVALUME® Coated Sheet, which exceeds anticipated environmental regulations in the United States. ACRYLUME CF™ also meets numerous European Union environmental directives, including Restriction of Hazardous Substances Directive (RoHS) and Registration, Evaluation, Authorization and Restriction of Chemical Substances (REACH).

The original ACRYLUME®, which meets all current environmental guidelines in the United States, will continue to be available to customers for commonly used applications such as metal roofing and siding.

The new ACRYLUME CF™ provides users with exactly the same benefits as traditional ACRYLUME®. ACRYLUME® set the standard for enhancing the outstanding corrosion protection of GALVALUME® Coated Sheet by sealing it in a tough, clear polymer coating. ACRYLUME® and ACRYLUME CF™ also minimize staining and discoloration issues during storage, handling and installation, and both products can be used in the same end-use applications, side-by-side if needed. In addition, neither product requires the application of lubricants prior to roll forming, thus they can be delivered to a job site free from slippery substances, providing customers with increased safety during handling and installation.

United States Steel Corporation, headquartered in Pittsburgh, Pa., manufactures a wide variety of flat-rolled and tubular steel products, coke, and taconite pellets at facilities in North America and Central Europe and has an annual worldwide raw steelmaking capability of 31.7 million net tons.

SOURCE United States Steel Corporation

For more information on AAA steel buildings, area zoning building requirements, buildings for storage, or buildings from steel, please visit our metal building informational site.

For more information on buy steel buildings, commercial steel building, or do it yourself buildings, please visit our metal buildings informational site.

For more information on erecting a steel building, metal church, or facades for steel buildings, please visit our steel buildings informational site.

For more information on metal garage, planning the steel building purchase, or premier metal roof systems, please visit our steel buildings informational site.

For more information on purchase a steel building, shop for steel buildings, or roofing systems steel, please visit our quality steel buildings informational site.

For more information on steel barn, steel church, or steel hangars, please visit our steel building accessories informational site.

For more information on steel homes, steel building foundations, or steel building advice, please visit our standing seam premier roofing informational site.

For more information on steel building interiors, steel building technology, or the correct type steel building, please visit our steel habitats informational site.

For more information on tile roof systems, wood vs steel buildings, or types of steel buildings, please visit our steel buildings informational site.

Mar 14, 2011

PITTSBURGH, March 14, 2011 /PRNewswire/ — United States Steel Corporation (NYSE: X) announced today that its tubular products subsidiary, U. S. Steel Tubular Products, Inc., has entered into an agreement with Surface Enhancement Technologies (SET), part of Lambda Technologies Group, to permit U. S. Steel Tubular Products to be the exclusive tubular products manufacturer to utilize Low Plasticity Burnishing (LPB®), an advanced, patented technology that can be applied to a variety of tubular products to improve their performance and extend their service life.

By utilizing LPB, U. S. Steel Tubular Products’ pipe performance designers will be able to engineer an applied layer of high residual compression to any specific area of a tubular product. U. S. Steel Tubular Products’ Product Development group and representatives from Lambda are also testing the ability of the LPB process to mitigate sulfide stress cracking in high-strength P110 grades.

LPB extends component life by creating a deep, stable layer of compression in part surfaces. Unlike other surface treatments, LPB induces a very low amount of cold work, making the protective layer thermally and mechanically stable. Processing is performed using basic Computer Numeric Controlled (CNC) machines or robots, allowing for quick and easy integration into manufacturing facilities. No alteration of the component’s material or design is required. LPB can be applied to a wide variety of alloys, including titanium, aluminum, nickel-based alloys and steels, and is currently in use in the aerospace, nuclear and medical industries.

“The LPB process will allow U. S. Steel Tubular Products to offer our customers a wide range of engineered product solutions with longer-lasting, more resistant parts designed to perform in situations that involve challenging field conditions,” said U. S. Steel’s Senior Vice President – Tubular Operations Douglas R. Matthews, who also serves as president of U. S. Steel Tubular Products.

“The relationship that will result from this agreement has almost limitless possibilities. The combination of innovation and experience that Lambda and U. S. Steel Tubular Products possess means that we will be able to do more than ever before to help solve material cracking and fatigue issues,” said Paul Prevey, chief executive officer of Lambda Technologies Group.

U. S. Steel Tubular Products, Inc., a subsidiary of United States Steel Corporation, is the largest tubular products manufacturer in North America, with total annual production capability of 2.8 million net tons. Energy industry customers utilize U. S. Steel Tubular Products’ casing, tubing, line pipe and couplings to help locate, retrieve, transport and refine the oil and natural gas products that fuel the world.

Lambda Technologies Group is an innovative company incorporating a premier materials research laboratory with a world-class engineering and production enterprise dedicated to the development and optimization of surface treatments to improve component performance. Along with U. S. Steel Tubular Products, Lambda has partnered with Delta, NASA, the U.S. Military and other organizations across industries.

For more information on AAA steel buildings, area zoning building requirements, buildings for storage, or buildings from steel, please visit our metal building informational site.

For more information on buy steel buildings, commercial steel building, or do it yourself buildings, please visit our metal buildings informational site.

For more information on erecting a steel building, metal church, or facades for steel buildings, please visit our steel buildings informational site.

For more information on metal garage, planning the steel building purchase, or premier metal roof systems, please visit our steel buildings informational site.

For more information on purchase a steel building, shop for steel buildings, or roofing systems steel, please visit our quality steel buildings informational site.

For more information on steel barn, steel church, or steel hangars, please visit our steel building accessories informational site.

For more information on steel homes, steel building foundations, or steel building advice, please visit our standing seam premier roofing informational site.

For more information on steel building interiors, steel building technology, or the correct type steel building, please visit our steel habitats informational site.

For more information on tile roof systems, wood vs steel buildings, or types of steel buildings, please visit our steel buildings informational site.